.156" elc screw-terminal/edgecard connector view part pdf file download part dxf file view part pdf file download part dxf file the compact .156" elc wire-to-board edgecard terminal block is designed for panel-mounting with bottom wire entry. connectors are available in single and double-sided configurations to meet specific application needs. superior contact design the elc features a bifurcated cantilever beam contact that eliminates the board damage possible with the stamped tuning fork board contacts commonly used in similar connectors. the cantilever beam also assures improved performance under board warping and bending conditions over the full .054" to .070" board thickness range. connectors are available with special marking and configuration adaptations, and in sizes not indicated in the table. please contact amphenol pcd for details. specifications: current rating: 5a insulation resistance: >105 megohms durability: 500 cycles per mil-c-21097 wire range: 14-26 awg wire pullout force: 35 lbs minimum board thickness range: .054-.070" materials: housing: glass-filled polyester, ul 94-v0, black contact: phosphor bronze, .000030" selective gold finish wire clamp: brass, nickel finish terminal screw: steel, nickel finish
|
